Quick answer
A like-for-like close-coupled toilet costs around £250–£500 supplied and fitted in Plymouth — often a half-day job. A wall-hung suite with a concealed cistern runs £500–£1,200 or more, and moving the toilet to a new spot adds significantly because the soil pipe has to move with it.
What you’ll pay to fit a new toilet
Toilets are one of those jobs where the price gap is wide, and it nearly always comes down to one thing: are we swapping like for like, or changing the type of toilet and where it sits? Here’s the honest range for a Plymouth home, so you know what you’re looking at before anyone steps through the door.
Close-coupled swap
Replacing an old close-coupled toilet with a new one in the same spot. Supplied and fitted this is usually £250–£500, with labour alone for a like-for-like swap around £150–£350 — a half-day job in most cases.
Wall-hung & concealed
A wall-hung pan on a concealed cistern looks superb but costs more — typically £500–£1,200+. You’re paying for a sturdy support frame, a false wall to hide the cistern, and the extra labour to build it all in.
Relocating the toilet
Moving the toilet to a new position means moving the soil pipe too, which adds £500–£1,500+. Where a gravity run isn’t possible, a macerator pump may be needed, which changes the job again.
The like-for-like swap explained
If your new toilet is the same type as the old one and stays exactly where it is, this is the cheapest and quickest job we do. We isolate the supply, lift out the old pan and cistern, and set the new one onto the existing waste and water connections. Most are done in a morning.
What’s included in a proper swap matters, because corners get cut on the cheap end. Every fit from us covers:
- A new isolation valve on the supply, so the toilet can be turned off on its own in future
- A fresh flexible pan connector to the soil pipe — never a reused, perished one
- Sealing the base neatly and checking the pan is dead level and solid
- Filling, flushing and testing for leaks before we tidy up and leave
It sounds obvious, but a wobbly pan or tired old connector is how slow leaks start. The same care goes into every en-suite and cloakroom fit we take on.
A clean swap is all in the detail — a new isolation valve, a fresh pan connector and a properly sealed, level pan.
Wall-hung and concealed-cistern toilets
Wall-hung toilets are popular for good reason. The pan floats off the floor, the cistern hides inside the wall, and the result is a clean, modern look that’s far easier to clean under. But that hidden simplicity takes more work to build, which is why a wall-hung suite sits at £500–£1,200 or more fitted.
The cost is in what you don’t see. A galvanised support frame is bolted in to carry the weight, a false wall is built and boarded to house the concealed cistern, then made ready for tiling. It’s a lovely finish, and a natural fit when you’re already planning a full bathroom installation rather than a standalone swap.
Comfort-height and rimless options
Two upgrades come up a lot, and both add a modest amount to the toilet itself rather than the labour. Comfort-height pans sit a little taller, which is kinder on the knees and back — popular with older clients. Rimless pans lose the hidden rim where grime and limescale gather, so they flush cleaner and wipe down quicker. Neither is dear, and we’re happy to talk you through which makes sense for your home.
Moving a toilet to a new position
This is where the price climbs, and it’s worth understanding why before you set your heart on a new layout. Relocating a toilet isn’t really about the toilet — it’s about the soil pipe. Waste has to fall away under gravity at the right gradient, so moving the pan means re-routing that pipe, which often means lifting floors and making good afterwards. Realistically that’s £500–£1,500 or more on top of the toilet itself.
Where a proper gravity run isn’t possible — a basement cloakroom, or a toilet far from the existing stack — a macerator (a pumped waste unit) can be the answer, opening up positions you couldn’t otherwise use. If you’re weighing this up, our guides on moving a toilet and overall bathroom costs in Plymouth go into more detail. We’ll always tell you honestly whether a new position is straightforward or a bigger undertaking.
Common questions
How much does it cost to fit a new toilet?
A like-for-like close-coupled toilet costs roughly £250–£500 supplied and fitted in Plymouth, with labour alone around £150–£350 for a straight swap. A wall-hung suite with a concealed cistern runs £500–£1,200 or more, and relocating the toilet adds £500–£1,500+ because the soil pipe has to move too.
How long does it take to fit a toilet?
A like-for-like swap is usually a half-day job — isolate the supply, remove the old pan, set and seal the new one, then test. A wall-hung concealed-cistern toilet takes longer because of the support frame, false wall and tiling, and relocating a toilet is longer again as the soil pipe needs re-routing.
What’s included when you fit a toilet?
Every fit includes a new isolation valve, a fresh flexible pan connector, sealing the base and levelling the pan, then filling, flushing and leak-testing before we leave. We never reuse a perished old connector or skip the testing — those small details are what stop slow leaks starting.
Got a question we haven’t covered? Take a look at our FAQs or just ask us directly.
No surprises, ever
Get a fixed price for your new toilet
Tell us what you’ve got and what you’d like, and we’ll give you a written, all-in price — whether it’s a quick swap or a smart wall-hung suite. Proudly Plymouth, and honest about cost from the first call.